Learning with pibby x don’t hug me I’m scared

2021.12.01 17:56 ollyduckhuntfan Learning with pibby x don’t hug me I’m scared

Learning with pibby x don’t hug me I’m scared submitted by ollyduckhuntfan to Pibby [link] [comments]


2021.12.01 17:56 Leto-The-Second Ceramic coating mouse feet update

Going back nearly a year I made a post about coating mouse feet with automotive ceramic sealant/coat and had said I would update in six months... I am a little bit late, but what is time anyway?
So, on to the matter at hand, the coating worked superbly (by my estimation) however I had only ever used the standard feet that came on my Kone AIMO Remastered so my evaluation may not reflect your experience. To apply it I had removed the feet from the mouse so as to prevent getting the coating anywhere I didn't want it to go (I am not sure what kinda of fun ceramic sealing and lasers or electrical components have when they party together, but ainalso dont want to find out on my own), the process of removing the feet without using a heat gun destroyed the adhesive which led to one of the feet coming dislodged after 3-4 months a bit after I had decided to buy a lightweight mouse to give the sub-70g a go. This means that after those first few months I have not used it.
The ceramic however had held up relatively well when compared to the damage that the ptfe feet usually display in the same time period, and I attribute the damage more to my mistakes than to standard wear. What mistakes you ask? Well, I had/have a hard pad with a rounded granular texture to it that I also coated. This meant that I had coated one texured suface and one smooth surface with a material of identical hardness, which is of course going to cause wear to the smooth surface as there are going to be many small points making it the gentlest sand paper ever known. Had I not coated the pad or been using a soft pad I feel there would have been nearly no damage to the coating at this point.
Now the real question: Would I recommend doing goong through the process? I would absolutely recommend doing it if you have standard teflon/ptfe feet on your mouse. I have since done the same to multiple mouses and had similar experiences to my original post, but there are some caveats. First and (probably) foremost, make sure you are using a pad that is softer than the coat you are using (this should not be an issue unless you decide to coat the pad). Second, make sure you do not damage the feet or adhesive when removing them. Or, even better, get a replacement set of feet and coat thase before putting them one. Third and final, put at least 5 coats on with enough time inbetween coats for them to full dry before apply the next coat. Fourth (ha, three wasn't actually the last) have a place free from air currents and debris to let the coat dry (something like an empty deli cup or shoe box, as small as you can get without have thebfeet touch anything.)
Also, shout out to u/GyneusYT for letting me know I had neglected to post an update, thanks for the heads up.
submitted by Leto-The-Second to MouseReview [link] [comments]


2021.12.01 17:56 StudentForAllMyLife The advice I need and the one your need

After I discovered TINYMAN a couple months ago. In these days I started making some NFTs during my free time. I actually thought that it's a complicated process to do, but at the end you just need to upload your pic/painting/pieceOfArt and put it on auction. For this reason, I thought that this post might help you get the push you need to step in the NFT world. I used algogem.io so I payed no fees to upload the NFT and setup everything.
Ps. For NFT seniors what do you think about this: https://algogems.io/nft/450263788
submitted by StudentForAllMyLife to AlgorandOfficial [link] [comments]


2021.12.01 17:56 DrunkenDragonDE Erbe ausschlagen

Ich muss ein Erbe ausschlagen dazu habe ich heute mit einem Notar gesprochen dieser setzt jetzt die Erklärung auf und ich kann diese dann abholen.
War ein ziemlicher Akt die letzten Tage.
Kann mir der Schwarm sagen ob es nun reicht bzw. Ok ist dieses Dokument per einschreiben Rückschein an das Amtsgericht zu schicken oder muss ich da unbedingt persönlich hin.
Hat jemand Erfahrungen?
submitted by DrunkenDragonDE to de [link] [comments]


2021.12.01 17:56 MonkeyDLuffy-6532 [further mechanics year 1]How to do this projectiles question ?

[further mechanics year 1]How to do this projectiles question ? submitted by MonkeyDLuffy-6532 to HomeworkHelp [link] [comments]


2021.12.01 17:56 MtnJew95 Problems with bo0st?

Is anyone else having problems with boosts? Won't let me send or receive.
submitted by MtnJew95 to chimebank [link] [comments]


2021.12.01 17:56 CaptionHQ Legit or fake?

Legit or fake? submitted by CaptionHQ to KithNYC [link] [comments]


2021.12.01 17:56 Intrepid_Bother5128 Así es el caserio

Así es el caserio submitted by Intrepid_Bother5128 to macarras [link] [comments]


2021.12.01 17:56 Ginga_Designs Well, fuck me…

Well, fuck me… submitted by Ginga_Designs to paintball [link] [comments]


2021.12.01 17:56 stubbornbunny H: 50 formula p W: fire bell wall decor built in my camp

submitted by stubbornbunny to Market76 [link] [comments]


2021.12.01 17:56 ritaf205 Recomendações de restaurantes no Porto

Boa noite! Vou este fim-de-semana ao Porto e não conheço muito bem a zona, então gostava de saber se têm recomendações de restaurantes (i.e., de comida portuguesa/nortenha, italiano, sushi, pastelarias). Agradeço imenso a ajuda!! ❤️
submitted by ritaf205 to portugal [link] [comments]


2021.12.01 17:56 KremZzX chanses of becoming a tier 1 pro?

So I have 1 1/2 year to get good. Im in the process of switching over to kbm to hopefully increase my skill cap. Right now I can easily handle school work, so Im wondering how much time a day would I have to spend on fortnite to achieve semi-pro status? If I fail to do it in the listed time I will have to dedicate a lot of my time to school work. My current skill level is pretty bad, I hit champs only for the past few seasons. Any advice ?
submitted by KremZzX to FortniteCompetitive [link] [comments]


2021.12.01 17:56 kalashnikovkitty9420 Its that time of the year…..for real tho i need that white ski mask its fucking fire

submitted by kalashnikovkitty9420 to bestestgunnitweekend [link] [comments]


2021.12.01 17:56 ShiplessOcean Chrome extension that will export Instagram followers/following to excel?

I have found YouTube videos with examples of these but they’re no longer available. Does anyone know of any alternatives?
submitted by ShiplessOcean to Instagram [link] [comments]


2021.12.01 17:56 Bamboozled2319 ...

... submitted by Bamboozled2319 to persona3FES [link] [comments]


2021.12.01 17:56 HallLast3549 Let's Go Eevee - Co-op Playthrough Part 26 - Pokemon League

Let's Go Eevee - Co-op Playthrough Part 26 - Pokemon League submitted by HallLast3549 to promote [link] [comments]


2021.12.01 17:56 DarthvaderDHL Hi guys hope you all doing great is here someone know where i can see new releases and maybe more info? And i am looking for the breaking bad pops sorry for my bad english and thank you

submitted by DarthvaderDHL to funkopop [link] [comments]


2021.12.01 17:56 caiojgs No r/memes

No memes submitted by caiojgs to suddenlycaralho [link] [comments]


2021.12.01 17:56 AmongWilderFlowers What is something you used to love that has now lost its magic?

submitted by AmongWilderFlowers to AskReddit [link] [comments]


2021.12.01 17:56 Low_Guarantee1232 As an OTR guy how do I do interviews for LTL jobs while on the road?

submitted by Low_Guarantee1232 to Truckers [link] [comments]


2021.12.01 17:56 -Nyco- What do you guys want or expect for the next Champion ?

So we know a champion is coming, what do you guys want gameplay wise or lore wise (what are you guys expecting) for the next Champion getting into the Rift ? Personally, I would be very happy with a very fast/dash type ADC character but the problem is that these types of characters are often busted at release lol
What about you guys ? Any ideas ?
submitted by -Nyco- to leagueoflegends [link] [comments]


2021.12.01 17:56 neok182 Tonight's ship stream is Winter Ship + Infinity Lockbox ship.

Tonight's ship stream is Winter Ship + Infinity Lockbox ship. submitted by neok182 to sto [link] [comments]


2021.12.01 17:56 JustTheBucket Most clutch role player of all time

Because of the post asking about the least clutch star in history, I started thinking about the inverse. They can be starters, but no allstars/all-nba guys. I apologize if this has been asked many times before.
submitted by JustTheBucket to nba [link] [comments]


2021.12.01 17:56 waitthatstaken Different crafring interfaces show different things in the "total raw" preview.

When looking at a car in the player crafting interface it says that the total raw is 8 engines, 20 iron plates and 5 steel. If you look at the car recipe in an assembly machine it shows 52 iron and 13 steel.
It seems to show the total raw that that "machine" can process. Since the player character can't craft engines, they show up as a raw ingredient.
This also works in different machines such as chemical plants.
For a car this isn't very useful, but for modules and more complicated items it can be quite useful.
submitted by waitthatstaken to factorio [link] [comments]


2021.12.01 17:56 Proof_Beach7617 Silly question, about to post pic of the halted trading sign but saw it on here already. Why? Can the attempted buys go through? Someone explain.

submitted by Proof_Beach7617 to DWAC_Stock [link] [comments]


http://mentalari.ru